HP ProCurve Switch Software Advanced Traffic Management Guide 3500 switches 3500yl switches 5400zl switches 6200yl switches 6600 switches 8200zl switches

06.08.2010  · My 5400zl is running 2007 firmware, ... > Update directly into software version K.14.60 ... 5400zl firmware upgrade.

Software Updates ... † ProCurve Switch 5400zl series Note: Switch software Version K.11.33 software or newer is ...

HP ProCurve Switch Software Advanced Traffic Management Guide 3500 switches 3500yl switches 5400zl switches 6200yl switches 6600 switches 8200zl switches

06.08.2010  · My 5400zl is running 2007 firmware, ... > Update directly into software version K.14.60 ... 5400zl firmware upgrade.

Software Updates ... † ProCurve Switch 5400zl series Note: Switch software Version K.11.33 software or newer is ...

It’s been a looooong time since I posted any networking stuff that wasn’t Cisco-centric, but I’m sitting here at home configuring an HP ProCurve 5406zl so I thought I’d take the opportunity.

The ProCurve 5400zl series have a USB port on them that you can use to transfer files, in addition to TFTP and SCP/SFTP. Since I had a few of these to upgrade and they were in a lab environment (e.g. not connected to any “real” networks), I didn’t want to bother with setting up a TFTP server. The upgrade process is pretty straightforward and is similar to doing an upgrade via TFTP.

HP software (“firmware”) updates do not require that you have a valid login or service contract, unlike Cisco. I grabbed the latest version (at the time of writing), which is K.13.45 (be sure to read the Release Notes that accompany each release as well, prior to performing an upgrade). Save the .downloaded file to your USB flash drive and plug the flash drive into the switch.

HP ProCurve Switch Software Advanced Traffic Management Guide 3500 switches 3500yl switches 5400zl switches 6200yl switches 6600 switches 8200zl switches

06.08.2010  · My 5400zl is running 2007 firmware, ... > Update directly into software version K.14.60 ... 5400zl firmware upgrade.

Software Updates ... † ProCurve Switch 5400zl series Note: Switch software Version K.11.33 software or newer is ...

It’s been a looooong time since I posted any networking stuff that wasn’t Cisco-centric, but I’m sitting here at home configuring an HP ProCurve 5406zl so I thought I’d take the opportunity.

The ProCurve 5400zl series have a USB port on them that you can use to transfer files, in addition to TFTP and SCP/SFTP. Since I had a few of these to upgrade and they were in a lab environment (e.g. not connected to any “real” networks), I didn’t want to bother with setting up a TFTP server. The upgrade process is pretty straightforward and is similar to doing an upgrade via TFTP.

HP software (“firmware”) updates do not require that you have a valid login or service contract, unlike Cisco. I grabbed the latest version (at the time of writing), which is K.13.45 (be sure to read the Release Notes that accompany each release as well, prior to performing an upgrade). Save the .downloaded file to your USB flash drive and plug the flash drive into the switch.

The ProCurve 5400zl series have a USB port on them that you can use to transfer files, in addition to TFTP and SCP/SFTP. Since I had a few of these to upgrade and they were in a lab environment (e.g. not connected to any “real” networks), I didn’t want to bother with setting up a TFTP server. The upgrade process is pretty straightforward and is similar to doing an upgrade via TFTP.

We can find the latest software for our ProCurve switches on the “Software for switches” page. Software (“firmware”) updates do not require that you have a valid login or service contract, unlike Cisco. I grabbed the latest version (at the time of writing), which is K.13.45 (be sure to read the Release Notes that accompany each release as well, prior to performing an upgrade). Save the .downloaded file to your USB flash drive and plug the flash drive into the switch.

SW1# show version
Image stamp: /sw/code/build/btm(t3a)
Aug 4 2008 15:08:24
K.13.25
93
Boot Image: PrimaryWe can see that we’re running version K.13.25 and that we booted from the primary flash. We can see the current contents of flash, as well as our USB drive:

Want to upgrade the software of my 5406zl - Community


Solved: Hewlett Packard Enterprise Community - 5400zl.

Posted by 2018 article

61EwzijM2XL